Albuquerque Commercial Waterproofing

Cold fluid applied Waterproofing coatings are monolithic, seamless and fully adhered membranes. Cold fluid applied Waterproofing coatings are single component, plural component and moisture cured coatings. Cold fluid applied can be installed by roller, trowelled or a notched squeegee. Cold fluid Waterproofing coatings can be installed on vertical and horizontal surfaces, such as walking decks, parking garages, planter boxes and below grade.

KOSTER Authorized Installed

Cementitious Waterproofing are seamless coatings that are designed to protect steel and concrete structures. Cementitous Waterproofing protects from chemical attacks and is a structural Waterproofing coating. These types of products can be applied by hand or spray applied. Cementitous Waterproofing is a coating that has positive and negative Waterproofing; these coatings are recommended for wastewater treatment facilities, lift pump stations, retaining walls, concrete tanks, pools, water features, walk decks, parking garages, marine docks, bridges and below grade.

Cementitious Waterproofing is a crystalline Waterproofing material that is highly flexible, polymer modified cement membrane, excellent adhesion, crack binding and can be applied to saturated concrete. Cementitious Waterproofing is breathable which allows the substrate to breathe so moisture escapes. This type of Waterproofing has negative and positive waterproofing over concrete structures. Cementitious waterproofing can hold a full head of water.

ALX was designed for plywood surfaces that use acrylic resins and cement blends that are reinforced with galvanized lath. ALX can be installed in interior and exterior applications such as lobbies, hotels, restaurants, walking decks, stairs, and landings. This type of Waterproofing can be finished with a texture and multiple finishes. ALX meets the class A fire test. ALX finishes range from non-slip to simulated flagstone or tile. Acrylic Waterproof is a MACoat deck coating system. MACoat is a fiber lath reinforced system that has four to five separate waterproofing applications. MACoat can be installed at interior and exterior applications such as in lobbies, hotels, parking deck structures, hotels, restaurants, walking decks, stairs and landings. MACoat can be finished with a textured and multiple other finishes. This decking system can be installed over existing coatings with the proper prep for installation.

MACoat is a fiber lath reinforced system that has four to five separate waterproofing applications. MACoat can be installed at interior and exterior applications such as in lobbies, hotels, parking deck structures, hotels, restaurants, walking decks, stairs and landings. MACoat can be finished with a textured and multiple other finishes. This decking system can be installed over existing coatings with the proper prep for installation.

Polyurethane Sealants are used in commercial and industrial fields. Sealants have good resistant to moisture, chemical attack, and corrosion. Polyurethane Sealants are flexible, THE SEALANT EXPANDS AND CONTRACTS WITH THE SUBSTRATE it has been adhered too. Sealants are available in single component and two component. Polyurethane Sealant can be installed on horizontal and vertical applications. Areas that are in the UV; sand or quartz may be broadcast into the wet sealant to help with UV exposure. Polyurethane Sealants are used for moisture remediation to protect the substrate at a joint. Polyurethane Sealants can be installed at CMU walls, concrete expansion joints, perimeter of a facility, and cracks or joints in substrates.